Troubleshooting - Sony CFD-676L Operating Instructions Manual

Troubleshooting |
Symptom Remedy
The power does not come on. * Connect the AC power cord securely.
¢ Make sure the batteries are inserted correcty.
¢ You can't turn on the player using the remote
ro when you operate the player on batteries.
@
& There is no audio. * Make sure the display window is displaying the
U) function you want to operate.
e Adjust the volume.
¢ Unplug the headphones when listening through
speakers.
The audio is weak or has poor ¢ Replace all the batteries with new ones if they
quality. ate weak.
* Move the player away from the TV.
oO ¢ If you are using the remote while listening to
3 SW/MW/LW radio, noise may be heard. This is
Po unavoidable.
The picture of your TV becomes If you are listening to an FM program near the
unstable. TV with an indoor antenna, move the player
away from the TV.
"no disc" lights in the display even °° Insert the CD with the label surface up.
when a CD is in place.
The CD does not play and "Error" —* Make sure that the disc tray is closed.
lights in the display. * Place the CD with the label surface up.
* Clean the CD.
a * Take out the CD and leave the disc tray open for
> : 5
& about an hour to dry moisture condensation.
a ¢ Make sure "CD" appears in the display.
as The sound drops out. * Reduce the volume.
e Clean the CD, or replace it if the CD is badly
damaged
° Place the player in a location free from
vibration.
The tape does not move when you *_ Close the cassette compartment securely.
press an operation button.
he
g The REC @ button does not * Make sure the safety tab on the cassette is in
= function/The tape does not play. place.
o ¢ Make sure that "TAPE" appears in the display.
2.
£
The tape does not erase completely.
* Clean the erasing heads (see page 31.)
Replace all the batteries with new ones if they
are weak.
continued
2 EN
Additional Information