Table of Contents
Advertisement
12. TRANSPORTATION
SGC is transported by road or rail transport in accordance with the rules of cargo
transportation.
Placement and securing of cargo takes place in accordance with the current technical
conditions for loading and securing cargo.
Loading and unloading of SGC could be done in the following ways:
By forklift or with the help of lifts or trained personnel.
During the transportation of SGC in covered vehicles, transportation is allowed without
packaging or with partial packaging that protects against mechanical damage.
13. MANUFACTURER'S WARRANTY
Product name:
Manufacturing company:
Serial number:
Date of sale:
Signature:
The manufacturer guarantees the compliance of the machines with the stated
requirements, subject to compliance with the transportation rules, storage, installation
and operation specified in this manual.
The warranty period of the machine is 12 months from the date of sale.
14
Warranty conditions:
Warranty repair refers to the replacement or repair of parts with a manufacturing
defect that manifested itself in work, which led to a malfunction. The decision to accept
a defective product for repair is made by a service employee of the manufacturer's plant
after getting acquainted with it during the maintenance of this product.
The buyer has the right to a free repair during the entire warranty period in the event of
a malfunction due to the manufacturer's shortcomings.
1. Warranty repair of the equipment takes place after the customer provides a fully
filled in warranty card.
2. Equipment subject to warranty repair must be provided by the customer to the
service department. Departure and repair of the equipment at its location by the
repair team is possible, but this must be agreed in additional written documents. The
cost of travel and accommodation of repair service specialists is paid for by the client.
3. Warranty obligations do not extend to materials and parts that wear out during
operation, namely: wheels of carts, tires, gaskets for sealing, protective covers, mesh,
and the like.
Warranty obligations do not extend to the following cases:
1. The serial number of the equipment submitted for warranty service does not match
the serial number specified in the warranty card and/or other written documents.
2. Unauthorized penetration into machine nodes.
3. Changes in the software setting of the frequency converter.
4. Improper storage and deconservation of the machine.
5. Present or hidden mechanical damage to the equipment, which occurs due to
violations of the rules of transportation, storage or operation.
6. A violation of the «Rules and conditions of operation» concerning this type of
equipment was detected during the repair process.
7. The presence of foreign objects in the middle of the equipment body, regardless of
their nature, if the possibility of this is not recorded in the technical documentation
or passport for this machine.
8. Connecting the equipment to the electrical network with a higher nominal electrical
voltage than the one declared by the manufacturer.
9. Failure of the equipment due to unstable parameters of the voltage in the electricity
network.
10.
Any unauthorized design changes and repair work.
11.
Failure of the equipment due to force majeure factors and/or the influence of
third parties.
12.
Installation, adjustment, training carried out by non-certified specialists.
15
Advertisement
Table of Contents
