Table of Contents
Advertisement
5. WORK OF SGC
The operation of the unit consists in separating the grain from the rest according to the given
size during its passage through the calibration mesh. At first, the grain is fed to the upper part
of the mesh, which moves with a small amplitude of oscillation, but with a high speed, during
the reciprocating movement of the mesh, the calibrated material is spilled. Large particles of
garbage that did not pass through the mesh fall into the receiving funnel for transfer to the
waste hopper. The calibrated material enters the receiving hopper of the ADS grain cleaner or
other equipment for further processing or transportation.
1. Downloading of primary material
2. Output of calibrated material
3. Output to the waste tray
1.
2.
3.
6
6. MARKING
A plate is attached to the outer surface of each SGC:
Name of the device: Pre-Cleaning Unit
Manufacturing company: Metra Group
Serial number:
Production date:
7
Advertisement
Table of Contents
