Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings; Remote Start - Bosch WAX32M40SG User Manual And Installation Instructions

Table of Contents

Advertisement

en Home Connect
Use the Home Connect app to
1.
scan the QR code.
Follow the instructions in the
2.
Home Connect app.
15.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold Remote Start 
1.
approx. 3 seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start / Reload 
3.
until the display shows On.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
15.4 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start 
1.
at least three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start / Reload 
3.
until the display shows OFF.
a Wi-Fi is deactivated.
34
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
15.5 Resetting the appliance
1.
2.
a The display shows rES.
3.
a The display shows YES.
4.
a The network settings are reset.
a If End is shown on the display, the
15.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
for
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
repeatedly
¡ The appliance door is opened.
¡ Start / Reload 
¡ Remote Start 
¡ The appliance is switched off.
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
¡ The appliance is connected to the
for
¡ A programme is selected.
¡ The appliance door is closed.
repeatedly
a Remote Start 
network settings
Press and hold Remote Start 
at least 3 seconds.
Set the programme to position 5.
Press Start / Reload 
Press Start / Reload 
network settings are reset.
home WiFi network.
Home Connect app.
Press Remote Start  .
appliance is enabled for remote
start via the Home Connect app.
.
.
is pressed.
is pressed.
lights up and the
for

Advertisement

Table of Contents
loading

Table of Contents