en Childproof lock
Add or remove laundry.
3.
Close the door.
4.
Press Start / Reload
5.
13.11 Cancelling the pro-
gramme
Press Start / Reload
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
– If the water level is high, start
the
Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 25
Remove the laundry.
3.
→ "Unloading the laundry",
Page 32
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 23
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
Spin programme or a
1.
programme for draining the water.
→ "Programmes", Page 25
Press Start / Reload
2.
13.13 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
32
.
.
programme.
.
13.14 Switching off the appli-
ance
Press
.
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two Child Lock
▶
buttons for approx.
3 sec.
3 seconds.
a The display shows
a The control elements are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
.