Unpacking And Repacking; Unpacking The Product; Repairing And Repacking The Product - Graco 243701 Instructions And Parts List

Unpacking and Repacking

Unpacking the Product

Your header with dispense valves was carefully pack-
aged for shipment by Graco. When the package arrives,
perform the following procedure to unpack the units:
1. Inspect the shipping box carefully for shipping dam-
age. Contact the carrier promptly if damage is dis-
covered.
2. Unseal the box and inspect the contents carefully.
There should not be any loose or damaged parts in
the box.
3. Compare the packing slip against all items included
in the box. Any shortages or other inspection prob-
lems should be reported immediately.
4. Remove the unit from the box.
5. Store the box and packing materials in a safe place
for future use. Graco recommends that all packing
materials be saved in case the unit needs to be
shipped again.
309181H
Repairing and Repacking the
Product
When the header with dispense valves requires service,
it is the purchaser's responsibility to have the unit
repaired. As an option, the purchaser can have the unit
repaired by an authorized Graco distributor.
On-site Service
The header with dispense valves components are cus-
tomarily serviced by the purchaser or an authorized
Graco technician. When service is required, follow the
Service procedures in this manual.
Unpacking and Repacking
5