Advertisement
Available languages
Available languages
PD-T303
FRONT PANEL
@
@
96
POWER
POWER
switch
Press to turn power to the unit ON and OFF.
DISC (i, II)
This is where the disc is set. When power is switched ON and
the OPEN/CLOSE key is pressed, the tray is ejected forward.
To insert the tray, press the OPEN/CLOSE key, or lightly push
the tray in with your finger.
OPEN/CLOSE keys (I, Il)
Press when you wish to eject or load a disc. Each time the
key is pressed, the tray is alternately pushed out or pulled in.
TIME key
This key selects the display mode of the indicator panel.
Each time the key is pressed, the indication changes from
TIME, REM, to TOTAL in that order. (For details concerning
the display contents, refer to the explanation about the indi-
cators.)
AUTO EJECT key
Press to perform auto eject playback.
When a disc is finished playing, the disc's disc tray will auto-
matically eject. The other disc tray will close and playback will
start. By replacing discs, continuous playback can be main-
tained.
REPEAT key
Press this key for repeat playback. Pressing the key once,
twice, or three times will change the repeat mode from single
track repeat, all tracks repeat, and repeat playback cancellation.
MANUAL SEARCH keys (44, >>)
When the player is in playback or pause modes, these keys
are pressed to perform fast forward or reverse operations to
allow manual searching. These operations are only carried out
during the time either key is pressed.
AUTO EJECT
REPEAT
PLAY
PAUSE
STOP/CLEAR
Indicators
AUTO EJECT
PGM
RND
DISC
>
00
TRACK
1®REP
REP
TIME/REM/TOTAL
TRACK SEARCH
PROGRAM
MEMORY
DISC I, DISC fl
: Lights during auto eject playback.
: Lights after programming
(after program
has been memorized).
: Lights during random playback.
: Displays the disc number (I or Il) of the disc
to be played.
: Lights during playback.
: Lights
during
temporarily
interrupted
playback.
: Displays the current track number and in-
dex number (during normal playback and
programmed playback) or the track being
programmed and the program steps dur-
ing programming
operation..
: Lights during repeat playback of one track.
: Lights during repeat play.
: Changes
each
time
the
TIME
key
is
@
TIME
@
REM
@®
TOTAL
pressed.
: Displays the track number of the track be-
ing played (TRACK) and the elapsed time
(minutes and seconds).
: Displays the remaining time on the track
being played.
When the TIME key is pressed again, the
remaining time on the disc being played
will be displayed.
: Displays the total number of tracks on the
disc (TRACK)
and the overall playback
time
(minutes
and
seconds)
of disc |.
When the TIME key is pressed again, the
total number of tracks on the disc (TRACK)
and the overall playback time of disc II will
be displayed.
During playback, the display goes on for
about 5 seconds before changing to the
TIME display.
Advertisement
