Beep; Lock / A.lock - Kenwood TM-702A Instruction Manual

144mhz, 430/440mhz fm dual bander
Hide thumbs Also See for TM-702A:
Table of Contents

Advertisement

ENGLISH
-
4-13
BEEP
The beep can be turned on and off.
Press the F key for longer than 1 second, then press the
REV/STEP key while the F indicator is flashing.
Each time this is done, the beep is turned on and off.
Press for longer 1 dekond:
4-14
LOCK / A.LOCK
There are three types of lock function.
(Microphone key lock
When the switch on the rear of the microphone is set
to the LOCK position, all the microphone keys except
the PTT key are disabled.
@ LOCK |
All the
panel
keys
and
the joning 'control are
disabled. However, the microphone function works. .
|]
Press the F key, then press the MHz/LOCK key within
|.
10 seconds. The LOCK indicator lights.
To ees the lock, press the F key again, then press
the MHz/LOCK key within 10 seconds.
@A.LOCK(ALL LOCK)
All operations, except the power switch, volume, and
squelch, are disabled.
Switch the power off while the LOCK indicator is on,
hold down the MHz/LOCK key, and switch the power
on again. The A:LOCK indicator lights.
To release A.LOCK, switch the power off while the A.
@
LOCK indicator is on, hold down the MHz/LOCK key,
and switch the power on again.
— -
;
The A.LOCK operation cannot be canceled by VFO or |
MR reset.
j

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-702e

Table of Contents