Table of Contents
Advertisement
DTSS.
:ON
PAGING : OFF
DTSS indicator
begins to
light.
: OFF
DTSS_—
: OFF
PAGING : ON
P indicator
begins to
light.
1, 'squelch will now remain closed until the correct code
'the selected code
group: will be transmitted.
It will
transmitted.
PTT ON
PTT OFF
;
v
v
jae Code (Approx.
0.5 seconds)
:then
press
the
SHIFT / DTSS
key until
the
DISS
indicator turns off.
~- The DTSS
signal
e F key and then the SHIFT/DTSS key 1 or 2.
Using DTSS with Repeater
is not
transmitted immediately
after -
you
press
the PTT switch.
A programmable
delay time
has been incorporated
to allow the DTSS
signal to be
passed by repeaters with slow response
times. You .can
ee
delay time of 250mS,450mS,
750ms, 850ms or 1
secon
When
operating in the simprex
mode
the 250mS
delay
will automatically
be selected
for you.
No other choice
is available
in this mode, even
though
you. may
have
selected a different delay.
in modes
other
than
simplex you. may
select
between
the remaining
delay periods (450,750,850,
or 1 second.)
4-8-5
Note: 250mS cannot be selected for offset modes.
@To select the desired delay time:
1. Press the F key for longer than 1 second
and then
press the BAND/DUP
key. The display will indicate the
current delay (Note: 250mS
is not displayed
even
in
the simplex mode).
2. Rotate
the
tuning
control
or
press
the
microphone .
UP / DWN
push
buttons
to select the desired
delay
time.
3. To
return
to the
nomal
frequency
display
wait
10
seconds for automatic return, or press any key.
37
Advertisement
Table of Contents
