Table of Contents
Advertisement
How to pair several speakers (cont'd)
Step 4
Long press the "Power" key for 2 seconds to power on slave Speaker
(Speaker B), After the "
speaker blinks. When the connection is successful, the orange indicator is
solid and the speaker will say "Connected " (Speaker B) receives the
signal from (Speaker A) and plays the same sound as (Speaker A).
Step 5
All (Speaker B,C,D,E...) and other slave Speaker(s) can enter the EZ Play
2 listening mode of the slave unit by performing steps 4 above, and play
the audio from the main unit.
Remarks:
Speakers B, C, D, E... need to be working in Bluetooth paring mode; if
1
Speakers B, C, D, E... are not in working Bluetooth connecting mode,
press and hold "BT" key for 3 seconds to enter pairing mode.
Adjust the Volume control on the master speaker, in the same group
2
speakers will sync the volume changing, If you adjust the volume on
any slave speaker, you only change the volume in that speaker.
" key is pressed, the orange indicator of the B
11
Advertisement
Table of Contents
