Table of Contents
Advertisement
Operating Instructions SIPLUS CMS4000 IFN AI
5.3
Parameterization of IFN AI
The IFN AI is parameterized through X-Tools. You will find parameterization details in
the „SIPLUS CMS4000 X-Tools Reference Manual".
5.4
Diagnosis through X-Tools
You will find detailed information in the „SIPLUS CMS4000 X-Tools Reference Manual"
5.5
Mixed configurations with ION and IFN
In case of mixed configurations with IFN (IFN AI and IFN VIB-ACC) and ION (ION Profi-
bus Spy, ION BI, ION AI, ION VIB-A, ...) in a single bus line with a MICROBOX PC, take
account of:
Connect the ION and IFN in a single line at plug 2 (Port 3).
The order of the nodes is not relevant.
If an existing MICROBOX PC with CMB IEEE1394A T011 is used, please verify that
plug 2 is connected with Port 3 of the PC/104-card.
A mixed configuration at plug 1 (PC/104-card Port 2 or Port 1) could cause communica-
tion problems and could inhibit the collection of data with the MICROBOX PC.
Picture 13
SIPLUS CMS4000 IFN AI
Operating Instructions, 07/2021, A5E02297872A-AA
MICROBOX PC, PCN 427C
plug 1 connected
with PC/104-card Port2
plug 2 conneted
with PC/104-card Port3
25
Advertisement
Table of Contents
