Advertisement
Power source:
eo",
Current:
Actual use (Max.)
PC—ES00
9. Note for servicing
1~1.5
Battery holding
Battery lid
Reference
Reference
Bottom cabinet
Battery hoiding cushion
PC-E500
9-3. Battery replacement label attachment
Bottom cabinet
i}
Battery replacement caution label (A)
TLABH1266ECZZ
|
*
Must be free from tilt.
9-4. Shield tape attachment
Shieid tape A
ae
-Reference
2) Fitthe A side with the reference, and paste the B side.
3) Remove the separation paper, and attach the tape.
Q)
«~ Fold.
Adhesive side
5) Attach the tape so that there is no slack.
Shield tape B
1) Bend E section. (Similar to C section.)
2) Fit with the reference and attach so that ai and a2 are even.
4) Attach the tape so that there is no slack.
\
9-5. Main PWB replacement procedure
@ Press the OFF key. (If a RAM card is installed, remove it.)
@® Switch the select switch from A to B.
@ Replace all the four batteries with new ones.
@ Press the RESET switch.
® Switch the select switch from B to A. {Install the RAM card.)
—
Arm®
—
Advertisement
