Table of Contents
Advertisement
2.2 USING THE TOOL MANAGER SOFTWARE
2.2.1 INSTALLING AND UPDATING THE TOOL MANAGER SOFTWARE
Before using the tool, install the Tool Manager software in your PC or tablet by following
the procedure below.
Preparation:
Prepare a PC or tablet with the supported OS installed.
(For the supported OS,
Installation
1
Download the installer of the Tool Manager software from our
website.
For how to download the Tool Manager software,
2
Open the folder where you saved the downloaded installer and
start "Install.exe".
3
When the installer is displayed, select [Next] (①).
4
The screen to select an installation folder is displayed.
To install the software in the default folder, select [Next] (②). To install it in another
folder, enter a folder path in "Folder" (③) or select [Browse] (④) and then select a
desired installation folder.
You can check whether the installation drive has enough capacity by selecting [Disc
Cost] (⑤).
EN
.)
Refer to 3.2
(version)
①
●
- 29 -
.
Refer to 1.1.1
③
●
Continued to the next page
④
●
⑤
●
②
●
Advertisement
Table of Contents
