Software Control; Installation Instructions; Software Operation - Texas Instruments TSW1266EVM User Manual

www.ti.com
2

Software Control

This section provides installation instructions and explanations of the TSW1266 GUI.
2.1

Installation Instructions

1. The software can be downloaded from the TSW1266EVM production page on www.ti.com. Find the
page by searching for TSW1266EVM. The software appears under the Related Products section on
the TI Software tab.
2. Extract the files from the zip file named TSW1266 GUI vXpY Installer.zip where XpY represents the
version number.
3. Run setup.exe, and follow the installation prompts.
4. Start the GUI by going to
Start Menu → All Programs → Texas Instruments ADCs → TSW1266 GUI.
5. When plugging the board into the computer for the first time through the USB cable, you are prompted
to install the USB drivers.
• Windows
®
screen to do so. Do not let Windows XP search Microsoft Update for the drivers, but do let
Windows XP install the drivers automatically.
• Windows 7: After installing the TSW1266 GUI, Windows 7 should automatically be able to install
the drivers for the TSW1266EVM with no input from the user.
2.2

Software Operation

The TSW1266 GUI allows the user to program the ADS5402, LMH6521, and LMK04800 for proper
operation. The controls for each device are split between different tabs for a simplified interface. Detailed
descriptions for each tab are below.
SLAU484 – January 2013
Submit Documentation Feedback
XP: If Windows XP does not automatically install the drivers, follow the prompts on the
Copyright © 2013, Texas Instruments Incorporated
Software Control
TSW1266EVM Evaluation Module
3