Sym Orbit 125 Service Manual page 98

9. FINAL DRIVING MECHANISM SYM
DISASSEMBLY OF FINAL DRIVING
7 bolts
MECHANISM
Remove the rear wheel. (refer to chapter 15)
Remove the clutch.
Drain gear oil out from gear box.
Remove gear box cover bolts (7bolts) and
then remove the gear box cover and the final
driving shaft.
Remove gasket and setting pin.
final driving shaft
Remove countershaft and gear.
final driving gear
Remove final driving gear and shaft.
countershaft gear
countershaft
driving shaft
INSPECTION OF FINAL DRIVING
MECHANISM
Check if the countershaft and the gear are
wear or damage.
final driving shaft
Check if the final driving shaft and gear are
burn, wear or damage.
final driving gear
9-2