Sym Orbit 125 Service Manual page 53

4. FUEL SYSTEM
FUEL TANK
Fuel unit removal
Remove the seat.
Remove the rear carrier. (3 bolts)
Remove the luggage box assembly (4 bolts).
Disconnect fuel unit connector.
Remove fuel unit.
Cautions
Do not bend the float arm of fuel unit.
Do not fill out too much gasoline to
fuel tank.
Fuel unit inspection. (Refer to chapter 16 -
electrical equipment).
Fuel unit installation
Install the gauge in the reverse order of
removal.
Cautions
Do not forget to install the gasket of fuel unit
or damage it.
FUEL TANK REMOVAL
Open the seat.
Remove the rear carrier. (3 bolts)
Remove the rear center cover.
Remove the luggage box and the double
seat(4 bolts).
Remove the left & right body cover.
Disconnect the fuel unit connector.
Remove the fuel pipe, fuel filter.
Remove the fuel tank (2 bolts).
Fuel Tank Installation
Install the tank in the reverse order of
removal.
4-10
fuel unit connector
fuel unit
gasket
SYM