Belt Tension Adjustment; Information; Workflow - Roland TrueVIS SG2-640 Service Notes

Belt Tension Adjustment

Information

Necessary tools
General tools
No. 2 Phillips screwdriver
3.0 mm hexagonal wrench
Typical work time
Contents of work

Belt tension adjustment

Workflow

1.
Open the maintenance cover L.
2.
Lock the print-head carriage.
3.
Confirm that the print-head carriage is locked by pushing it lightly to the left to eliminate looseness.
1
Time
40 min.
2
2-50
2
SG2-640/540/300