Pioneer KEH-M5500 UC Service Manual page 64

o> Ga l= Fr 4
2. ADJUSTMENT
2.1 CHECK POINTS OF CASSETTE MECHANISM
-@ REW torque:
(4.76cm/s *? %)
Using an NCT-111, measure the speed at
the start and end of winding and take
the maximum value. If values indicated
by the pointer vary considerably, adjust
to 70% of the minimun and maximum
values. Measuring time shall be 5 — 6
seconds.
@ Winding torque:
35 — 659 - cm
2-—6g°cm
@ Wow and flutter:
Less than 0.2% (WRMS)
@ F.F. torque:
70 — 120g * cm
Less than 0.7 ko
as