Advertisement
GM-202
,102
10. OPERATIONS AND CONNECTION(GM-202/X1H/UC)
iat
xe [6]
& 7}
(uit
HT 1104
-
1gf
E
(38)
-
Fig. 10
Fig. 11
Setting of This nit
(Fig. 9)
[1] Power Indicator
The power indicator lights when the power is switched on.
5
[2] input Level Adjustment
E
if the sound is too low, even when the volume of the car
stereo used along with this power amplifier is turned up, turn
input level control on the back of the power amplifier clock-
wise. If the sound distorts when the volume is turned up, turn
the input level contro! counterclockwise
+ Set the input fevel contro! to 500 mV when this amplifier is
connected to a Pioneer car stereo with RCA output jacks. ff
the sound is too low or distorts, adjust the input level
control,
[3] BFC (Beat Frequency Control) Switch
It you hear a beat while listening to an AM broadcast with
your car stereo, change the BFC switch using a small screw-
driver.
17
Advertisement
