Advertisement
GM-202,102
CAUTION
WARNING
2. DISASSEMBLY
@ Removing the Case and Panel
1.Remove four screws, and then remove two cases
2.Remove two screws, and then remove panel.
@ Removing the Amp Unit
1,Remove eight screws.
2.Amp
unit is unremovable
from heat sink if pulled up
ordinarily,
because
silicone
compound
has been
applied between heat sink and subheat sink.
To remove amp unit, therefore, follow steps below.
a. Unfasten two arbitrary screws securing power
transistor.
b. Screw them little by little alternately into
screw
holes A to get amp unit afloat and remove
it.
3.Once amp unit has been removed, screws
with which
Power
transistor
has
been
secured
should
be
returned to thier original position.
:
qi
Subheat Sink
Heat
Sink
Fig.2
iy)
Advertisement
