Kenwood TS-50S Instruction Manual page 46

7 MENU SET-UP
MENU A SETTING
Menu A contains those items listed in the table below. 3
These are the more frequently changed functions.
Follow this procedure to change the settings:
1 Press the F.LOCK button for more than two 4
seconds to enter the Menu Set-up mode.
Pa A
rey
aa tua
2 If the B indicator appears, press the A/B button to
display the A indicator.
The menu number appears at the left of the
display and the current setting appears at the
center.
Select the menu number using the tuning control.
Select the setting using the UP or DOWN button.
After you have changed a setting, press the CLR
or F.LOCK button to exit the Menu Set-up mode.
| pie ! Description Selections 'Default Heterence,
1 No, | page
RF output power switches through three levels (100, a
(ele) 50, and 10 W). as 100/50/10 100 20 as
oO Display brightness switches through five levels. _ i OFF/d4/d3/d2/d1 | d2 \ - d
| gg | AGC mode switches between slow(S) or fast(F). S/F s i or i
(SSB, CW and AM only. No selection in FM.) (CWA) |
| IF filter select. (SSB, CW, and AM only. No selection 2.4kHz !
03 in FM) as eek cae 0.5/2.4/6.0kKHz (AM:6.0kH2) | 20, 22,43
SSB/CW mode switches between two-steps (SSB)
a and three-steps (ULC). | mee /OEG we oe Tf
0S CW keying delay switches between FULL (full break- = FULL/100/200/300/ 600 24
in}, or a value in milliseconds. 400/600/800/1000/
daa
|
1400/1800 ms
ee
CW offset switches through the range of 400 to 1000 =
| °% tz in 50 Hz steps. Sidetone is fixed at 800 Hz. ES ee eee EN, Seep
07 | CWreverse function. ON/OFF OFF 23
08 Tuning control disable. ON/OFF OFF — ante
09 Busy-Frequency Stop for program scan. ON/OFF ON 40
to | Busy-Frequency Stop for program scan switches o/t 0 : 40
| between Time Operated (0) and Carrier Operated (1). ' i
Tt Busy-Frequency Stop for memory scan. ON/OFF ON : 40
12 Busy-Frequency Stop for memory scan switches o/t 0 40
between Time Operated(Q) and Carrier Operated(|).
Memory channel scan switches between all memory
7
7 channels(ON)or only the desired channel group(OFF). ON/OFF ORE 3
| RF meter sensitivity switches between X4 scale (ON) FE
pale or normal{OFF). Only available with 10 W selected. ON/OFF OF ee
| 15 Subaudible tone frequency. OFF may not allow ON/OFF ON 20, 29
repeater access, —
16 Frequency step size from microphone (SSB and CW 10/100/1k/5k/10kHz 40kHz 49
i, modes only) switches through five step sizes. ne eres aM
17 Frequency step size from microphone (FM and AM 10/100/1k/Sk/10kHz| 10kHz 49
J modes only) switches through five step sizes. i
46