Table of Contents
Advertisement
4y
Getting Started
©
Unpacking
Check that you received the following items with your
: amplifier:
¢ Remote controller (remote) (1)
* Size AA (R6) batteries (2)
¢ Scart adaptor (1)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and -—on
the battery compartment. When using the remote,
point it at the remote sensor fl on the amplifier.
1
a
When to replace batteries.
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
amplifier, replace both batteries with new ones.
Notes
¢ Do not leave the remote in an extremely hot or humid
place.
* Do not use a new battery with an old one.
* Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
* If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Hookup Overview .
The amplifier allows you to connect and control the
following audio components. Follow the hookup
procedures for the components that you want to
connect to the amplifier on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 13."
TV/VCR Hookups (5)
Speaker System
Hookups (6).
Audio Component
Hookups (5)
Before you get started
¢ Turn off the power to all components before making
any connections.
* Do not connect the mains lead until all of the
connections are completed.
* Be sure to make connections firmly to avoid hum
and noise.
¢ When connecting an audio cable, be sure to match
the colour-coded pins to the appropriate jacks on the
components: White (left, audio) to White; and Red
(right, audio) to Red.
Advertisement
Table of Contents
