Table of Contents
Advertisement
Ace
- Getting Started
SE
a
Hookup Overview
The amplifier allows you to connect and control the
following audio components. Follow the hookup
procedure indicated for each component that you want
to connect.
To learn the location and name of each jack, see "Rear
Panel Descriptions" on page 11.
DAT deck
Tape deck
Tuner
[- MD deck
|| Turntable
|
CD player
|
Speaker (L)
TV or yidee
Speaker (R)
Before you get started
¢ Turn off the power to all components before making
any connections.
¢ Do not connect the mains leads of the various
components until all connections are completed.
¢ Use the audio connecting cords supplied with each
component for hooking up with the amplifier.
Purchase and use optionally available cords as
required.
* Be sure to make connections firmly to prevent hum
and noise.
When connecting an audio connecting cord, be sure
to match the R (right) and L (left) jacks of the
amplifier to the R and L jacks on the other
components.
a
gee
ny
Audio Component Hookups
Overview
Here you learn how to connect your audio components
to the amplifier.
rh TUNER
AUX
TAPE1/DAT
EON CONTROL IN
(TA-FE530R only)
PHONO
CD
TAPE2/MD
What cords will | need?
Audio connecting cord (not supplied) (2 for each tape deck,
DAT deck, or MD deck; 1 for other components)
White (L)
Red (R)
Hookups
The arrow ==> indicates signal flow.
Note
The jacks on the TA-FE530R are shown in the following
illustrations.
CD player
Amplifier
CD player
Tuner
Advertisement
Table of Contents
