Table of Contents
Advertisement
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
and, at the same time,
2.
turn the programme selector to po-
sition 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 36
To change the value, press
4.
To save the changes, switch off
5.
the appliance.
Programme counter
17 Programme counter
The program counter displays the
Programme counter
number of finished programmes.
17.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press
and set the programme to
2.
position 2 at the same time.
Set the programme to position 5.
3.
Cleaning and servicing
18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Trumrengöring (Drum
▶
Clean) programme without laun-
dry but with washing powder that
.
contains oxygen bleach or a a
cleaning agent for caring for the in-
side of the appliance.
→ "Accessories", Page 29
Programme counter en
37
Advertisement
Table of Contents
