Aiwa CT-X409 Operating Instructions Manual page 10

MY INFORMATION SWITCH
4,7 6,8
5 9
4 Press SEL.
Radio indication flashes.
5 Press BAND to select the band.
6 Tune in the station that you wish to
preset with TUNE T or TUNE A.
7 Press SEL.
Timer indication flashes.
8 Set the time you wish the unit to turn
off.
Press TUNE T to set the hour.
Press TUNE A to set the minute.
9 Press and hold MY INFO for more than
2 seconds.
Your setting is stored in memory and the unit
turns off.
Activating the timer
BAND TAPE
CD/MD IN J
1 With the unit on, press MY INFO.
The "MY INFO" indicator lights up and the
timer is activated.
To cancel the timer
Press MY INFO again so that the "MY INFO"
indicator disappears.
To check the setting
With the unit off, press MY INFO.
The turn-on time, followed by the radio frequency
and the turn-off time, appears in the display
window each for 1 second, then the unit turns off.
Notes
• Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically.
• Even if you are listening to a radio program with
this function, pressing the following buttons
switches the unit to other mode:
— Pressing BAND changes the unit to Radio
— Pressing TAPE changes the unit to Tape
Play mode.
— Pressing CD/MD IN changes the unit to CD/
MD IN mode.
If you switch modes with these buttons, the unit
does not turn off at the turn-off time of the timer.
ENGLISH