To Program Punch Through Functions; C-2. To Erase Punch Through Functions; To Edit The Buttons On Lcd; To Move Buttons - Home Theater Master MX-1000 Operating Manual

7. System and Operations Set Up
C. To Program Punch Through Functions.
You can use audio receiver volume control in a different mode ( eg.
Audio receiver Volume Up and Volume Down and Mute in Satellite
mode ) using a volume punch through feature. You can also have four
VCR ( or DVD ) transport buttons, Play, Stop, Fast Forward and
Rewind, operate in another mode such as in Satellite, Cable and
Audio modes. You can also make CHANNEL punch through.
C-1 Programming:
1. Press PUNCH THROUGH in the LCD screen in 2. SYSTEMS &
OPTIONS mode.
2. Press VOLUME UP button for Volume Punch Through or press
the PLAY button for Transport Punch Through. or CHANNEL up
button for Channel Punch Through.
3. Select the device you wish to punch through to ( 1st device ).
4. Select the device you wish to punch through from ( 2nd device ).
5. Repeat from Step 2 to program Punch Through to other devices.
Once you complete the Punch Through programming and wish to
exit, press both the MAIN and PAGE buttons simultaneously. This
will take you to the setting mode. Move the cursor to 8. TO EXIT in
the setting mode and press down the cursor to exit or simply press the
MAIN button to exit to main menu.

C-2. To Erase Punch Through Functions.

Press the same device button in the PUNCH THROUGH TO? and
PUNCH THROUGH FROM? during the Punch Through
programming.
19

8. To Edit the buttons on LCD

You can add or delete buttons, change the button size and shape,
move the button locations and edit the text on the buttons on LCD
screen in the EDITING Mode.
1. Go into setting mode by pressing both the MAIN and PAGE
buttons simultaneously for five seconds.
2. Move down the cursor in the LCD screen to 5. EDIT BUTTONS
using joystick.
3. Push down the joystick to enter the EDITING mode. The LCD will
list the following six choices to choose from and select the button you
wish to enter.
A. To Move Buttons:
This operation moves functional buttons to any location on the LCD
screen. It also moves the button from one page to another within the
selected device.
1. Set the cursor to COMMON BUTTON and select the device you
wish to enter. Select the functional button you wish to move in the
device page and move them with the joystick within the same page or
move to the next page by pressing the PAGE button. Once you
position the button at the location or page you desire, push the
joystick down to save it.
2. Repeat the above step to continue to move other buttons in the
same device.
3. If you wish to move buttons in another device, return to the main
menu by pressing the MAIN button and repeat from STEP 1.
4. Once the operation is completed and you wish to exit from this
mode, return to the main menu by pressing the MAIN button and then
20