LCD. You can also make these changes with the aid of your personal computer. Setting up the MX-1000 to work with your components is very easy and simple. Please follow the instructions in the manual and retain the manual for future reference.
2. Battery Installation MX-1000 uses four AA batteries. Please be sure to match the batteries with the (+) and (-) markings inside the battery compartment during installation. The remote control goes through self-testing for three seconds after the batteries are installed and automatically moves to setting mode for your programming.
Internet. You can also load programs and data in the remote control to your personal computer and download them to another MX-1000. Please refer to page 26 in the manual for details. H. All other operations: You can set the duration of the back light or the LCD display to stay on as well as low battery warning level and the "beep"...
5. Getting Ready with System Setting All the programming is done by first entering the SYSTEM SETTING mode in the remote control. Press both the MAIN and PAGE buttons simultaneously for five seconds to enter the SYSTEM SETTING mode.
6. Programming the Remote Control You can program the MX-1000 to make it compatible with all of your components by following either the preprogramming method or teaching it with your original remote controls. A. Preprogramming Method: 1) Using a three-digit code number.
6. Programming the Remote Control 7. Point the remote control to the component and press the BRAND button. 8. Press the number button on LCD screen that corresponds with the first alphabetical character of your brand name. ( Please press the number button within 20 seconds of programming.)
2-3 inches apart as shown below. 5. Press either the device button or functional button, whichever you wish to teach in the MX-1000. It is now ready to learn on the button you selected. 6. Press the button on your original remote control that you wish to teach into the MX-1000.
3. Press both the POWER and STOP buttons simultaneously for five seconds in the learning mode. The LCD will show ERASED after it erased all the learned commands in the remote control. 4. Once you complete the erasing and wish to exit from this mode, press both the MAIN and PAGE buttons simultaneously.
7. System and Operations Set Up B-1. Macro Programming: There are three type of macro functions you can program. They are as follows: 1. M1, M2 and M3 in the Main menu: Designed to send out up to twenty eight commands from each of the three buttons.
7. System and Operations Set Up C. To Program Punch Through Functions. You can use audio receiver volume control in a different mode ( eg. Audio receiver Volume Up and Volume Down and Mute in Satellite mode ) using a volume punch through feature. You can also have four VCR ( or DVD ) transport buttons, Play, Stop, Fast Forward and Rewind, operate in another mode such as in Satellite, Cable and Audio modes.
It can also be restored by clearing the entire memory in the remote control and a new program is loaded to the remote control. The learned functions will be lost permanently with...
8. To Edit the buttons on LCD D. To Insert Buttons This is designed to create new functional buttons in any of the twelve devices. The following choices of button sizes and shapes are available: 1. Select INSERT button in EDITING mode. 2.
8. To Edit the buttons on LCD F. To Edit a Text This is designed to write a new text on any of the buttons in the LCD screen with the following steps: The following choices of fonts are available in two sizes for text editing: 1.
Please note that the LCD screen is a breakable glass. Please use necessary caution in handling LCD screen. 14. Memory Lock The MX-1000 has an internal memory lock system that retains all the programs and learned functions for the extended period. 15. Erasing all the Programs...
17. Specifications Operating range 40 ft ~ 60ft, depending upon components. Power requirements Four size AA batteries Battery life About 4 months Weight 7.38 Oz (not including batteries) Dimensions 8.9 x 3.0 x 1.5 (W x H x D) Programmed Code Numbers: AUDIO TUNER TAPE...
Page 17
Set-Up Function Table SATELLITE Button Name SAT Functions Button Name Device Name SAT(On) POWER On/Off (Off) FETCH CH UP Channel Up FAV1 CH DOWN Channel Down FAV2 VOL UP Volume Up VOL DOWN Volume Down FAV3 MUTE Mute FAV4 PRE. CH Prev.
Page 18
Set-Up Function Table Button Name VCR1,2 Functions Button Name Device Name VCR(On) INPUT POWER On/Off (Off) VCR+ CH UP Channel Up MENU-PGM CH DOWN Channel Down DISPLAY VOL UP Volume Up AUDIO MONITOR VOL DOWN Volume Down COUNTER MUTE Mute RESET PRE.
Page 19
Set-Up Function Table Button Name DVD Functions Button Name Device Name DVD(On) SET-UP POWER On/Off (Off) CLEAR CH UP Skip ANGLE CHANGE CH DOWN Skip RANDOM VOL UP RETURN VOL DOWN AUDIO CHANGE MUTE TITLE PRE. CH Page SHUFFLE PLAY Play TIME STOP...
Page 20
Set-Up Function Table LASER DISC Button Name LD Functions Button Name Device Name LD(On) FRAME/TIME POWER On/Off (Off) CLEAR CH UP Track + / Skip + AUTO PGM CH DOWN Track - / Skip - DISC A VOL UP Volume Up DISC B VOL DOWN Volume Down...
Page 21
Set-Up Function Table Button Name AUX Functions Button Name Device Name AUX(On) POWER On/Off (Off) CH UP CH DOWN Down VOL UP VOL DOWN MUTE PRE. CH Page PLAY STOP CURSOR ENTER CURSOR UP CURSOR DOWN CURSOR LEFT CURSOR RIGHT Page Page DISP...