Fast Forwarding And Rewinding Cassette Tapes - Kenwood KRC-S300 Instruction Manual

Cassette player features (See page 7)
Playing Cassette Tapes
Loading and Playing Cassettes:
Load a cassette with the tape exposed on the right
The tape starts playing automatically
With side A facing up, the ® indicator lights up when side Ais
playing, and «4 when side B ts playing.
The <® indicator lights up while play is paused
Playing Cassettes Already Loaded:
Press the SRC (source) bu!ton repeatedly to select the tape
mode. "TAPE" is displayed when the tape mode has been
selected
Listening to the other side:
Press the FF button and REW button at the same time
Tape play switches to the other side
Stopping and Ejecting Cassettes:
Press the & button
The lape stops playing and the cassette eyects
| wore |]
Remove a cassette from the unit when not listening to it fora
while If you leave it in the unit too long, the tape may stick to
the tape head and cause unit malfunction
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
Press the fF button.
The tape indicator blinks mn the direction of the tape as itis
being fast forwarded
{f the REW button is pressed, normal tape will begin.
Rewinding Tapes:
Press the REW button
The tape indicator blinks in the direction of the tape as it is
being rewound
lf the FF button is pressed, normal tape play will begin
Turier Call
Switch automatically to the tuner while you are rewinding or
fast forwarding the tape.
Turning Tuner Call On/Off:
Press the 1.C button to switch tuner call on and off
The 1.CALL indicator lights up when tuner call is turned on
11