Disc Changer - Kenwood KRC-S300 Instruction Manual

Disc Changer
PROBLEM
POSSIBLE CAUSE
SOLUTION
The dice coaniger mode cannot
he seloctod
lj cable has beer connected to the dise changer input
rereoinal on die unt
The specified dise does nat
play but another one plays
instead
'he spemfied COD is quite dirty
He CD 1s upside down
The disc is loaded ina different slot from that specified
he dise 3s severe'y scratched
The sound skips
Thee display stones that thee
nhangeris being played but rae
sound cat be: heard
Something 15 touch:ng the disc changer
Tae CD is scratched or dirty
Conneet the cable to the dise changer input terminal on the
uit
Clean the CD
ead the Cl with the labeled side up
Eject the disc magazine and check the nurnber for the speci-
fled disc
ry another disc instead
Temove whatever is touching tt
f skipping happens at the same place when the car is
slapped sornethiig with the CD is wrong Coan the €D
Lhe cotapater ctepre the nner act fie tioeat tierersiley yOUs the peaset button on fie caer isee po ht
The: specified track woll not
nlay
fandan glay or agazine randann play bas been selected
urn aff randoms play or magaaine randorn play
actions.
E-01
Load the disc magazine praperly
E-02
No dise has been loaded in the disc magazine
© Load a disc into the disc magazine
E-04
No disc has been loaded tn the disc magazine
= Load a disc into the disc magazine
The CD is quite dirty. The CD is upside-down. The CD ts scratched a lot
= Clean the CD and toad it correctly
£-10
Nothing has been recorded on the MD
The next MD will automatically be played
E-11
No tracks are recorded on the MO, although it has a ttle
= The next MD will automatically be played
No disc magazine has been loaded in the changer The disc magazine ts not completely loaded
21