Printer Installation - Panduit TDP43ME Manual

Note: Label Calibration Button (Item #3)
A hardware button to make a label calibration. This button can be used if the printer encounters a "Media Error" during printer start up or during
changes of the label or ribbon material.
(Press Calibration-button for 2 seconds, it will autosense to calibrate according to the label and ribbon parameters).

2. Printer Installation

This printer model has the following print modes:
Thermal Transfer (TT)
TDP43ME: PA26305A01_08
When printing, ribbon must be installed to transfer the print contents onto the media.
TDP43ME
1. Ribbon Supply Shaft
2. Label Guide (2)
3. Platen Roller
4. Label Sensor
1.
2.
3.
4.
5.
6.
7.
8.
Page 10 of 75
Wireless Port / Antenna
(optional)
Rear Label Slot
Label Calibration Button
Power Switch
AC Adapter Socket
USB Port
Serial Port
Ethernet Socket
11-2022