Table of Contents
Advertisement
TROUBLE-SHOOTING
TINES DO NOT ROTATE
PROBABLE CAUSE
REMEDY
Material wrapped around
Clean and free up tine
tine shaft - Rock or root
shaft-Disengage Tiller
wedged in housing.
Drive and drive tractor
in reverse with tines on
ground.
Belt not properly tensioned
Readjust (Do not over ten¬
sion)
TINES DO NOT DIG
PROBABLE CAUSE
REMEDY
One or more tines are re-
Check tine installation.
versed
cutting edges must be toward
direction of rotation
Tractor hitch linkage im¬
properly adjusted
Check and adjust linkage
Ground to. dry and hard
TILLER CLIMBS OUT OF GROUND
PROBABLE CAUSE
REMEDY
Attempting to cut too deep
Make shallow cut on first
for ground conditions on
pass-make successive passes
first pass
Too high a forward speed
Reduce forward speed (use
Tractor Speed Reduction
Ki t)
Ground conditions severe
Adjust cutting depth with
tractor control lever and
make successive passes
TINES WILL NOT CLEAR
GROUND IN RAISED POSITION
PROBABLE CAUSE
REMEDY
Tractor hitch not adjusted
Adjust Tiller lift link
-
11
-
Advertisement
Table of Contents
