Connecting The Telephone Cords; Applying Power To The Base Unit - Uniden XCA4510 Owner's Manual

Connecting the Telephone Cords

Consider these safety guidelines before connecting the telephone cords:
CAUTION:
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
Use caution when installing or modifying telephone lines.

Applying Power to the Base Unit

The
without a switch to interrupt power) and the included AC adapter. Connect
the adapter as shown below.
1. Wrap the power cord around
the convenient notch on the
bottom.
Important: Place the power
cord so that it does not
create a trip hazard, or
where it could become
chafed and create a fire or
other electrical hazards.
2. When power is first applied,
the message counter display
flashes quickly while the
system's memory initializes.
When the flashing slows,
press the STOP button on the
Base Unit.
3. The message counter
display turns off, and the
time and remaining message
record time are announced.
Note: For information about
turning the Answering
System On/Off, see page 44.
requires a standard electrical outlet (120 volts AC
MAILBOX
STOP
ANS ON/OFF
DELETE
10
Digital Answering System
0
1 2 3 4
REPEAT PLAY SKIP
OGM MEMO INTERCOM
PAGE/FIND