Citizen Promaster Sky Super Skyhawk JY0080-62E Instruction Manual page 42

Resetting the watch
The watch may not work properly if it is affected by static electricity or shock. In this
case, you must reset the watch. Charge the watch before resetting if the power reserve
level is low.
0 1 2
Crown position
0 1 2
Crown position
40 40
Pull the crown out to position 1.
1.
The chronograph second hand indicates the
daylight saving time setting.
2.
Rotate the crown to select "UTC".
• Adjust the position to the center of the window.
Pull the crown out to position 2.
3.
4. Press the upper and lower right buttons ( A
and B ) simultaneously.
The confirmation tone sounds and the watch is
reset.
The current position of all the hands is set as the
new reference position.