Receiving The Time Signal Manually (On-Demand Reception) - Citizen Promaster Sky Super Skyhawk JY0080-62E Instruction Manual

Receiving the time signal manually (On-demand reception)

You can adjust the watch by receiving the time signal any time when the time is not
correct or the reception result is "NO".
• You must be in an area that you can receive a time signal.
• Before attempting on demand reception, be sure to reset the chronograph.
0 1 2
Crown position
30
60
24
20
15
20
Ensure that the crown is in position 0.
1.
Press and hold the lower right button ( A )
2.
for two or more seconds.
A
The watch starts to receive the signal with the
beep sound, and the chronograph second hand
moves to "RX".
• It takes from two to 15 minutes for updating to
• The watch will not start to receive if the second hand is
60
50 10
40 20
• The signal station is changed depending on the
30
• You can cancel the reception by pressing the lower
complete.
moving once every two seconds (this is the insufficient
charge warning).
selected city.
right button ( A ) for two or more seconds.