If you select
, then the
No
Caller ID screen returns.
Storing a Caller ID number in a memory location
1. Press
.
call id
The Caller ID summary screen shows
the number of new calls and total
number of calls.
2. Use
or
to select
or
.
Line 2
Press
.
select
3. Press
or
to find the name/
number that you would like to store.
4. Press
to store the
mem
selected message.
The following screen appears:
5. The Select Location screen appears. Use the
a two-digit number (01-30) to select a blank memory location where
you would like to store the number. (If you want to replace an
existing number with the Caller ID number, skip to step 7.)
6. Press
. A confirmation tone
select
sounds. The number is programmed.
7. If you choose to replace an existing
number with the Caller ID number, press
. The following screen appears:
select
8. Use the
key to move the cursor to
A confirmation tone sounds. The number is programmed.
>Line 1 03
Line 1
Select Location
1>Smith John
2 UNIDEN
Yes
>No
. Press
Yes
New Total
03
Line 2 01
01
and
keys or enter
Replace Memory?
.
select
39