Uniden EXS 9966 Owner's Manual page 38

36
4. If y ou want to set CIDCW, use
the key or 2 to move the cursor
to .
2 CIDCW
Press the key to toggle between
select
5. After you finish the setting, press call id and return the handset
to the base.
Programming Your Area Code
1. Press and hold
call id
seconds. The following screen appears:
2. Use the and
key (1 or 2) to select
. Then, press
Line 2
The following screen appears:
3. Use the and
cursor to select
3 Area Code:
Press . Use the number keypad to
select
enter or change the area code. Press
again.
select
4. After you have made your selections, press
handset to the base.
Screening your calls
Caller ID allows you to review caller
information before answering your
phone. At the beginning of the second
ring, the display shows the line number
that is being used, name, and phone number of the caller. If your
Caller ID service is number only, the name does not appear
on the second line.
If a name or number is not available, the display shows a
message such as Incomplete Data, Private Number,
Private Name, etc.
On
for two
keys or the number
or
Line 1
.
select
keys or 3 to move the
1>Auto Talk:Off
2 CIDCW :On
3 Area Code:
and .
Off
Caller ID Setup
1>Line 1
2 Line 2
1>Auto Talk:Off
2 CIDCW :On
3 Area Code:
and return the
call id
Call(Line 1)
Smith John
817-555-1212