Asus XD4N Quick Start Manual

Quick
Start Guide
ASUS ZenWiFi AX Mini
AX1800 Dual Band WiFi Router
Model: XD4N
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ZenWiFi AX Mini, and power them on.
1
Use a network cable to connect your modem to the WAN port of XD4R. XD4R will be the
2
AiMesh router, and XD4N will be the AiMesh node.
The LED turns solid blue to indicate that ZenWiFi AX Mini is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up
and manage your router(s).
AiMesh Setup Steps
01 Prepare
Place your ZenWiFi AX Mini router and node within 3 meters of
each other during the setup process.
02 AiMesh node
Keep your AiMesh node powered on and standby for AiMesh
system settings.
03 Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check the following and try again.
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is
a
within 3 meters.
Your AiMesh node is powered on.
b
E16368_XD4R_XD4N_(one-page_2PK)_QSG.indd 1
Hardware Explanations
Plug the adapter into the DCIN port.
1
The power LED will light up when your hardware is ready.
2
XD4R Overview
LAN port
DC-IN port
WAN/LAN port
Specifications:
WAN/LAN port
Connect your modem to this port
DC Poweradapter
with a network cable.
Operating Temperature
Operating Humidity
LAN port
Connect your PC to a LAN port
with a network cable.
AiMesh node
(XD4N)
AiMesh Setup Steps
within
3 meters
AiMesh node
AiMesh router
(XD4N)
XD4NOverview
DC-IN port LAN port
DC Output: +12V with max 1.5A current
0~40 C Storage 0~70
o
50~90% Storage 20~90%
AiMesh router
(XD4R)
(XD4R)
C
o
2020/3/10 10:26:34