Asus ZenWiFi XD6 Quick Start Manual

Quick
Start Guide
ASUS ZenWiFi XD6
AX5400 Dual Band WiFi Router
Model: XD6
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ZenWiFi XD6, and power them on.
1
Use a network cable to connect your optical modem to the WAN port of either ZenWiFi XD6. This
2
ZenWiFi XD6 will be the AiMesh router, and the other ZenWiFi XD6 will be the AiMesh node.
The LED turns solid blue to indicate that ZenWiFi XD6 is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up and manage your router(s).
AiMesh Setup Steps
Prepare
01
Place your ZenWiFi XD6 router and node within 3 meters of each oth-
er during the setup process.
02 AiMesh node
Keep your AiMesh node powered on and standby for AiMesh system
settings.
Launching ASUS Router APP
03
Launch ASUS Router APP, and then follow the on-screen instructions
to finish the AiMesh setup.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again.
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
a
Your AiMesh node is powered on.
b
Hardware Explanations
Plug the adapter into the DCIN port.
1
The power LED will light up when your hardware is ready.
2
Button and Port Explanations
LAN ports 1~3
DCIN port WAN port
Specifications:
DC Power adapter DC Output: +12V with max 2A current
Operating Temperature
0~40 o C Storage
Operating Humidity 50~90% Storage
AiMesh node
AiMesh Setup Steps
within
3 meters
AiMesh node
WAN port
Connect your modem to this port with
a network cable.
LAN ports 1~3
Connect your PC to a LAN port with a
network cable.
0~70 o C
20~90%
AiMesh router
AiMesh router