Uniden EXI976C User Manual page 16

• If you are not sure of
your dialing system,
set for tone dialing.
Make a trial call. If the
call connects, leave the
setting as is. Otherwise
set for pulse dialing.
• If your phone system
requires pulse dialing
and you need to send
the DTMF tones for
certain situations
during a call, you may
switch over to tone
dialing. (Refer to "Tone
Dialing Switch-over" on
page 19.)
[ 16 ] G E T T I N G S T A R T E D
1) When the phone is in standby mode, press and hold the
caller id/menu key. The following screen appears.
2) Press the vol/ /
3) Press the select key to toggle between
4) Press the end key or return the handset to the base unit to
complete the setting. The handset returns to standby mode.
Setting the language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold the
caller id/menu key. The following screen appears.
2) Press the vol/ /
3) Press the select key to toggle between
4) Press the end key or return the handset to the base unit to
complete the setting. The handset returns to standby mode.
key three times to select
Tone
key four times to select
Eng
.
Dial
and Pulse .
.
Language
, and .
Fr. Esp
www.uniden.com