Uniden EXI976C User Manual page 11

4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
5) Place the handset in the base unit for 15-20 hours without
interruption. The base unit's LED light (labeled charge/in
use) illuminates once the handset is placed in the base.
The LED light will illuminate whether the battery pack is
connected or not.
If the base charge/in use LED light does not illuminate:
• Check to see if the AC adapter is plugged into the base
unit and the electrical wall outlet properly. (Use only the
supplied AC adapter. Do not use any other AC adapter.)
• Check to see if the handset is sitting correctly in the
base and making good contact with the base unit's
charging contacts.
www.uniden.com
Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988, Monday
through Friday from
8:00 a.m. to 5:00 p.m.
or online at
www.uniden.com
G E T T I N G S T A R T E D [ 11 ]