Canon EOS 1 Instructions Manual page 50

AEB Information
• The AEB function remains active until the
lens is removed or the main switch is
turned to " L".
-Do
not set an amount that will exceed the
maximum or the minimum aperture value
of the lens in use or that will exceed either
1/8000 second or 30 seconds shutter
speed.
50
-To shift the bracketed exposure value
toward overexposure or underexposure,
you can combine exposure compensation
with AEB. Be sure to set the bracketing
amount before setting the exposure com-
pensation amount.
-Please note that the three exposure values
for the AEB sequence are displayed both
in the viewfinder and on the display panel.
-Quring the AEB sequence, the "AEB" mark
on the display panel blinks as does the
''*' '
mark in the viewfinder.
-When using manual exposure mode, you
may select either aperture value or shutter
speed as the variable setting in the AEB se-
quence by setting Custom Function
#
5.
(see p.54).
-To take three contin'uous exposures, of a
moving subject with AEB, for example, set
the film winding mode to C (continuous ex-
posure) and keep pressing the shutter but-
ton all the way down.