Canon EOS-1DC Instruction Manual
Hide thumbs Also See for EOS-1DC:

Advertisement

This manual is for the EOS-1D C installed with firmware version
1.3.0 or later.
Read this manual together with the EOS-1D X Instruction
Manual (firmware version 1.2.0 or later) and EOS-1D X Wired
LAN Instruction Manual.
The "Software Start Guide" is included at the end of this manual.
Downloaded From camera-usermanual.com Canon Manuals
ENGLISH
INSTRUCTION
MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Canon EOS-1DC

  • Page 1 Read this manual together with the EOS-1D X Instruction  ENGLISH Manual (firmware version 1.2.0 or later) and EOS-1D X Wired LAN Instruction Manual. INSTRUCTION The “Software Start Guide” is included at the end of this manual. MANUAL  Downloaded From camera-usermanual.com Canon Manuals...
  • Page 2: Introduction

    After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
  • Page 3: Instruction Manuals

    EOS Camera Instruction Manuals Disk. EOS Camera Instruction Manuals Disk (Software) The software that comes with the EOS-1D C differs from that of the EOS-1D X. See “Software Start Guide” on pages 93 to 97. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 4: Item Check List

    * Be careful not to lose any of the above items. Wired LAN To set up a wired LAN using the Ethernet RJ-45 terminal, refer to the separate “Wired LAN Instruction Manual” on the EOS Camera Instruction Manuals Disk. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 5: Conventions Used In This Manual

    The illustrations in this manual show the camera attached with the EF 50mm f/1.4 USM lens as an example. For cautions regarding the use of EF Cinema (CN-E) lenses, see pages 17 and 29. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 6: Table Of Contents

    Shooting Function Settings ............33 Setting the Movie-recording Size ........... 34 Setting the Sound Recording ............39 Silent Control.................. 42 Setting the Canon Log Gamma............43 Setting the Time Code..............47 3 Menu Function Settings............51 k Playing Movies ................. 57 B: Shooting Information Display..........
  • Page 7 Contents Reference Differences with the EOS-1D X Instruction Manual ......62 System Map ..................66 Menu Settings ................. 68 Troubleshooting Guide..............70 Specifications..................76 Safety Warnings................88 Software Start Guide Software Start Guide...............94 Index ....................97 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 8: Handling Precautions

    The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
  • Page 9 If you use continuous shooting, Live View shooting, or movie shooting for a prolonged period, the camera may become hot. Although this is not a malfunction, holding the hot camera for a long period can cause slight skin burns. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 10: Nomenclature

    Vertical-grip on/off Tripod socket switch <B> Vertical-grip AF area selection mode/ Multi-function/ Body number Multi-spot metering button Vertical-grip Main Dial (p.19) Vertical-grip shutter button (p.18) Hand strap mount Accessory alignment hole Body cap Downloaded From camera-usermanual.com Canon Manuals...
  • Page 11 AE lock button (p.22, 25) Power/Multi function lock switch <p> Vertical-grip AF start button <S> Vertical-grip (p.28) AF point selection button * Parts without reference page numbers are explained in the EOS-1D X Instruction Manual. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 12 Dioptric adjustment knob Battery Rear LCD panel Battery compartment cap * For the nomenclature of the top LCD panel, rear LCD panel, Battery Pack LP- E4N, and Battery Charger LC-E4N, see pages 24 to 28. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 13 <Y> External microphone IN/Line input terminal (p.39) < > HDMI mini OUT terminal (p.49, 53, 54) <F> Remote control terminal (N3 type) <q/C> Audio/video OUT/ <n> Headphone terminal Digital terminal (p.41) Cable clamp screw hole (p.14) Downloaded From camera-usermanual.com Canon Manuals...
  • Page 14: Using The Cable Protector And Clamp

    Using the Cable Protector and Clamp With a Canon HDMI cable (sold separately): Interface cable Cable protector HDMI cable (sold separately) Cable clamp With a third party HDMI cable (commercially available): If the plug of a third-party HDMI cable can fit into the Cable protector, using the Cable protector is recommended.
  • Page 15: Shooting And Playing Movies

    MOV. This chapter assumes that an EF lens is used with the camera. If you use an EF Cinema (CN-E) lens, see the cautions on pages 17 and 29, and start movie shooting. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 16: Preparing To Shoot Movies

    The image area surrounded by the masking will be recorded as the movie. Notes on Movie Shooting are on page 27. For information related to card operation confirmation, refer to Canon website, etc. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 17 If you want to shoot still photos while shooting a movie, you will need an even faster card. To check the card’s writing/reading speed, refer to the card manufacturer’s website. To optimize the card’s performance, format the card before shooting movies. For card-formatting cautions, see zpage 55. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 18: Shooting Movies

    (or press the <B> button) again to stop shooting the movie. Movie microphone If Canon Log gamma is set, AF is not possible. If H, I, or A:8/7 is set, AF is not possible in the f mode. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 19: Shutter-Priority Ae

    1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject’s movement will look. If you change the shutter speed while shooting under fluorescent or LED lighting, image flicker may be recorded. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 20: Aperture-Priority Ae

    The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.18). Changing the aperture during movie shooting is not recommended since changes in the exposure, due to the drive of the lens aperture, will be recorded. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 21 If [ISO speed range]’s [Minimum] is set to [L (50)] and you switch from still photo shooting to movie shooting, the automatic ISO speed setting range’s minimum for movie shooting will be ISO 100. It cannot be expanded to ISO 50. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 22 LED Light This camera is compatible with the function turning on the LED light automatically in low-light conditions during movie shooting in d, s, f or BULB mode. For details, refer to the Speedlite’s instruction manual. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 23: Manual Exposure Shooting

    If you cannot set the shutter speed or aperture, set the power switch to <1>, then turn the <6> or <5> dial. Focus and shoot the movie. Aperture The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.18). Downloaded From camera-usermanual.com Canon Manuals...
  • Page 24 ISO speed within ISO 200 - 25600 (depending on the [ISO speed range] setting). Under [z2: ISO speed settings], [Auto ISO range] and [Min. shutter spd.] cannot be set (zp.131, 132) for movie shooting. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 25 When you press the <A> button and then recompose the picture, you can see the exposure level difference on the exposure level indicator (p.26) compared to when you first pressed the <A> button. By pressing the <B> button, you can display the histogram. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 26: Information Display

    TV set with an HDMI cable (zp.273), the electronic level is not displayed. If there is no card in the camera, the movie shooting remaining time will be displayed in red. When movie shooting starts, the movie shooting remaining time will change to the elapsed time. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 27 35mm full-frame sensor size. Cautions for movie shooting are on pages 55 and 56. If necessary, also see “Live View Shooting Cautions” on pages 221 and 222 in the EOS-1D X Instruction Manual. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 28 With a fully-charged Battery Pack LP-E4N, the total movie shooting time (with H shooting) will be as follows: approx. 1 hr. 25 min. at room temperature (23°C/73°F), and approx. 1 hr. 15 min. at low temperature (0°C/32°F). Downloaded From camera-usermanual.com Canon Manuals...
  • Page 29 Correction is applied only for movie shooting. Additional cautions regarding the use of EF Cinema lenses may be announced on the Canon website, etc. Lens Aberration Correction with EF Cinema (CN-E) Lenses With the EOS-1D C’s firmware Ver. 1.3.0 or higher, lens aberration...
  • Page 30 Auto Lighting Optimizer Peripheral illumination correction Chromatic aberration correction Highlight tone priority Even when Canon Log gamma (p. 43) is set, function settings other than the Picture Style will be reflected in the final image simulation. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 31: Shooting Still Photos

    You can then shoot still photos while shooting the movie. Note that you cannot shoot still photos if H, I, A:8/7, or Canon Log gamma is set. Taking still photos during movie shooting If you take a still photo during movie shooting, the movie will record a still moment lasting approx.
  • Page 32 You can shoot still photos in all drive modes. The self-timer can be used before you start shooting a movie. If used during movie shooting, the self-timer will switch to single shooting. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 33: Shooting Function Settings

    The setting of the selected function is displayed at the bottom. Turn the <5> or <6> dial to set it. If [Canon Log] is set to [On], Picture Style and Auto Lighting Optimizer cannot be set. During movie shooting, you can set the following: shutter speed, aperture, ISO speed, exposure compensation, and sound-recording level.
  • Page 34: Setting The Movie-Recording Size

    If H is set, chromatic aberration correction (zp.156) cannot be set (not applied). If you shoot a low-contrast subject with [Live mode] or [u Live mode] when H or I is set, focus may not be achieved with AF. Manual focusing is recommended. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 35: Image Area

    When I or A is set, the movie will be recorded in 1920x1080 resolution. When B is set, the movie will be recorded in 1280x720 resolution. When C is set, the movie will be recorded in 640x480 resolution. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 36 The color sampling will be recorded as follows: H: YCbCr 4:2:2 (8 bit), I A BC: YCbCr 4:2:0 (8 bit). The color matrix will be recorded as follows: HC: Rec. ITU-R BT.601, I A B: Rec. ITU-R BT.709. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 37 If the card is not full, you can press the shutter button completely (or press the <B> button) to shoot a movie again. (It will be recorded as a new file.) Downloaded From camera-usermanual.com Canon Manuals...
  • Page 38 EOS MOVIE Utility can automatically combine individual 4 GB movie files and save them as a single movie file. About Full HD 1080 Full HD 1080 indicates compatibility with High-Definition featuring 1080 vertical pixels (scanning lines). Downloaded From camera-usermanual.com Canon Manuals...
  • Page 39: Setting The Sound Recording

    This feature takes effect only with the built-in microphone. Note that [Enable] will also reduce low bass sounds, so set this function to [Disable] when there is no wind. It will record a more natural sound than with [Enable]. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 40 Both L and R record audio at a 48 kHz/16-bit sampling rate. If [z5: Silent Control] is set to [Enable h] (p.42), you can adjust the sound-recording level with the < > touch pad to reduce the operation noise during movie shooting. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 41 You can also use headphones during movie playback. The audio output to the headphones will not have noise reduction applied. It will therefore be different from the sound recorded with the movie. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 42: Silent Control

    <h>. If it still does not work, wait a while and try again. Before shooting a movie, you can use <h> to adjust the sound-recording level in the Quick Control and [Rec. level] screens. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 43: Setting The Canon Log Gamma

    It minimizes loss of shadow and highlight details, and tonal information from the shadows to highlights can be incorporated in the movie. A movie shot with Canon Log gamma can be applied with a lookup table (LUT) during post-production. Download the LUT data from the Canon website.
  • Page 44 * Red, green, and blue cannot be adjusted individually. Image Quality when Canon Log gamma is set When Canon Log gamma is set, vertical noise stripes may appear in movies depending on subject or shooting conditions. It is recommended to shoot a few test movies and check before the actual shooting.
  • Page 45 This makes it easier to check the angle of view, details, etc. Note that even if View Assist is set, it will not affect the movie recorded to the card. (The movie will be recorded to the card with Canon Log gamma.) Select [View Assist.].
  • Page 46 (p.26) is displayed (when the lens focus mode switch is set to <AF>). Even if you switch [Canon Log] to [Off], you cannot revert to the original settings for shooting mode, AF mode, and ISO speed. Set them again if necessary.
  • Page 47: Setting The Time Code

    (zp.40), the time code will be affected. “Regenerate” function is not available, that reads the last time code recorded in the old card and resumes the count in the new card when you replace or switch the card. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 48 If you change the setting for either [Movie play count] in [z5 (movie): Time code] or for [x3: Movie play count], the other setting will also change automatically. “Frames” are not displayed during movie shooting and movie playback. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 49 If the movie-recording quality’s frame rate (p.36) and HDMI output frame rate are set manually to NTSC and PAL frame rates in a combination that does not function properly, the time code will not be appended to the HDMI output image. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 50 When the frame rate is 4 (23.98 fps), 5 (25.00 fps), or 7 (50.00 fps), there will be no dropped frames. (If 4 is set or [53: Video system] is set to [PAL], [Drop frame] option will not be displayed.) Downloaded From camera-usermanual.com Canon Manuals...
  • Page 51: Menu Function Settings

    You can set sound recording settings. For details, see pages 39 and 40. Regarding headphones, see page 41. If Canon Log gamma is set, AF is not possible. If H, I, or A:8/7 is set, AF is not possible in the f mode.
  • Page 52 Remote Switch RS- 80N3 or Timer Remote Controller TC-80N3 (both sold separately). (zp.183) Note that when [V/o] is set, still photo shooting (p.31) is not possible. The [o] setting will enable still photo shooting during movie shooting. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 53 During A/V OUT output, nothing will be displayed on the LCD monitor. The brightness of a movie shot by the camera and that of a recorded HDMI output image on the external recording device may differ depending on the viewing environment. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 54 If the frame rate set manually is not compatible with the external recording device, the frame rate will be set automatically. If [Movie recording size] is set to frame rate 4 when [HDMI frame rate: 60i] is set, “2-3 pulldown” will be performed. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 55 LCD monitor. In low light, noise or irregular colors may appear in the image. In movies, the bright areas will be recorded in almost the same way you see it on the LCD monitor. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 56 If you connect the camera to a TV set and shoot a movie (zp.273, 276), the TV will not output any sound during the shooting. However, the sound will be properly recorded. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 57: Playing Movies

    With the single-image display, the <1s> icon displayed on the upper left indicates a movie. Each time you press the <B> button, the display format will change. No information Basic information Histogram Shooting information display Downloaded From camera-usermanual.com Canon Manuals...
  • Page 58: Index Display

    In such a case, you may not be able to combine the file with other files into a single movie file and save it, using software such as EOS MOVIE Utility (p.94). Downloaded From camera-usermanual.com Canon Manuals...
  • Page 59 TV set. (Turning the <6> dial will not adjust the sound volume.) If you took a still photo while you shot the movie, the movie image displayed will look still for approx. 1 sec. during movie playback. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 60: B: Shooting Information Display

    If you use HDMI output to play a H movie, it will be played in Full HD (1080 60i/50i). However, using EOS MOVIE Utility (p.94) enables you to play the movie in H quality. For information not shown on this page, see “Sample Information for Still Photos” on zpage 252. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 61: Reference

    Reference This chapter covers other differences with the EOS-1D X’s Instruction Manual, system accessories, and an FAQ. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 62: Differences With The Eos-1D X Instruction Manual

    3 Saving and Loading Camera Settings p.351 to 353) With the EOS-1D C, the following functions are added and saved. [z5 (Movie)] HDMI output + LCD, and Canon Log settings [53] HDMI frame rate Downloaded From camera-usermanual.com Canon Manuals...
  • Page 63 [53] HDMI frame rate When [Canon Log] is set to [On] and Custom shooting mode <w1>, <w2>, or <w3> is set, the shooting mode will also be switched to <a>. Be aware that the shooting mode may be updated when [Auto update set.] is set to [Enable].
  • Page 64 18 (18) 41+5 41+6 10M+4.5M 18.3+2.1 19 (19) 4.5M Around A4 13.0 38 (40) 4.5M+18M 13.0+6.0 18 (18) 61+3 61+H 4.5M+14M 13.0+4.8 18 (18) – 4.5M+8.0M 13.0+3.3 19 (19) 61+5 4.5M+4.5M 13.0+2.1 19 (19) 61+6 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 65 Differences with the EOS-1D X Instruction Manual The file size, possible shots, and maximum burst during continuous shooting are based on Canon’s 8 GB testing card and Canon’s testing standards (JPEG quality 8, ISO 100, and Standard Picture Style). These figures will vary depending on the subject, card brand, ISO speed, Picture Style, Custom Functions, and other settings.
  • Page 66: System Map

    Hand Strap Anti-Fog Solution Disk Eyepiece Eg Focusing Battery Pack LP-E4N Screen Ec series AC Adapter Kit Battery Charger ACK-E4 Car Battery Cable LC-E4N CB-570 * Battery Pack LP-E4 and Battery Charger LC-E4 are also compatible. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 67 LAN cable (commercially available) Computer Windows 8 USB port Windows 7 Windows Vista Windows XP Mac OS X CF card Card reader PictBridge-compatible printer GPS Receiver GP-E1 * The length of all cables is approx. **m/**ft. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 68: Menu Settings

    Recording level Wind filter: Disable / Enable Silent LV shooting Mode 1 / Mode 2 / Disable 4 sec. / 16 sec. / 30 sec. / 1 min. / 10 min. / Metering timer 30 min. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 69 Movie shooting button / V/ HDMI output + LCD Mirroring / No mirroring Canon Log / View Assist. / Sharpness / Canon Log settings Saturation / Hue * The setting is linked to [Movie play count] under the [x3] tab (zp.372).
  • Page 70: Troubleshooting Guide

    [51200/H] or higher, the manual setting range’s maximum will be expanded to enable ISO 32000/40000/51200 to be set. However, since movie shooting at ISO 32000/40000/51200 may result in substantial noise, the expanded ISO speed (“H” displayed) will be used. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 71: Movie Shooting

    LED bulbs, or other light sources during movie shooting. Also, changes in the exposure (brightness) or color tone may also be recorded. In the <a> mode, a slow shutter speed may solve the problem. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 72 Set [z5: Movie shoot. btn] to [o]. You cannot shoot still photos during movie shooting if any of the following is set: Canon Log gamma, Since the image circle of EF Cinema zoom lenses does not support the image size of 35mm full-frame size image sensor, still photo shooting is not possible.
  • Page 73 If ISO Auto is set, it will be automatically switched to manual ISO speed setting (p.43). Vertical noise stripes appear. When Canon Log gamma is set, vertical noise stripes may appear in movies depending on subject or shooting conditions. For details, see page 44.
  • Page 74 Troubleshooting Guide Canon Log gamma icon blinks. When Canon Log gamma is set and [Peripheral illumin.] is set to [Enable], Canon Log gamma icon on the information display screen blinks, since noise may appear in the movie image periphery. AF is not possible.
  • Page 75 The movie cannot be played back. Movies edited with a personal computer cannot be played back with the camera. Movies shot with Canon Log gamma or shot in cannot be played back by another EOS camera. When the movie is played back, camera operation noise can be heard.
  • Page 76: Specifications

    * Dual CF card slots Image sensor size: Approx. 36.0 x 24.0 mm Compatible lenses: 1. Canon EF lenses (except EF-S and EF-M lenses) 2. Canon Cinema (CN-E) lenses (EF mount) * The effective angle of view is equivalent to the lens focal length.
  • Page 77 * Number of available AF points and cross-type points vary depending on the lens. Focusing brightness range: EV -2 - 18 (with center f/2.8 AF point, at 23°C/73°F, ISO 100) Focus modes: One-Shot AF, AI Servo AF, Manual focusing (MF) Downloaded From camera-usermanual.com Canon Manuals...
  • Page 78 : ±3 stops in 1/3- or 1/2-stop increments (Can be combined with manual exposure compensation) AE lock: Auto : Applied in One-Shot AF mode with evaluative metering when focus is achieved Manual : By AE lock button Downloaded From camera-usermanual.com Canon Manuals...
  • Page 79 RAW+JPEG Large: Approx. 17 shots (approx. 17 shots) * During high-speed continuous shooting * Figures are based on Canon’s testing standards (ISO 100 and Standard Picture Style) and an 8 GB card. * Figures in parentheses apply to an UDMA mode 7, 128 GB card based on Canon’s testing standards.
  • Page 80 : Approx. 205 MB/min. HD (60p/50p) / ALL-I : Approx. 610 MB/min. SD (30p/25p) / IPB : Approx. 78 MB/min. Color sampling: YCbCr 4:2:2 (8 bit): 4K YCbCr 4:2:0 (8 bit): Super 35mm Crop, Full HD, HD, SD Downloaded From camera-usermanual.com Canon Manuals...
  • Page 81 Rec. ITU-R BT.601: 4K, SD Rec. ITU-R BT.709: Super 35mm Crop, Full HD, HD Pixel range: 8 bit, 0 to 255 (with Canon Log Gamma: 8 bit, 16 to 254) Movie characteristic: 1. Canon Log gamma, 2. Picture Style selectable * If Canon Log gamma is set, View Assist is possible.
  • Page 82 Specifications Still photo shooting: Possible * If Canon Log gamma is set or 4K, Super 35mm Crop, or Full HD 60p/50p is set, still photo shooting is not possible. Two-screen display: Simultaneous display of LCD monitor and HDMI output image is possible.
  • Page 83 Still photos (JPEG, RAW, RAW+JPEG images), Movies • Custom Functions Custom Functions: Save camera settings: Up to ten sets can be registered in a card Custom shooting modes: Register under C1/C2/C3 My Menu registration: Possible Copyright information: Entry and inclusion enabled Downloaded From camera-usermanual.com Canon Manuals...
  • Page 84: Operation Environment

    Weight: Approx. 1545 g / 54.5 oz. (CIPA Guidelines), Approx. 1355 g / 47.8 oz. (Body only) • Operation Environment Working temperature range: 0°C - 45°C / 32°F - 113°F Working humidity: 85% or less Downloaded From camera-usermanual.com Canon Manuals...
  • Page 85 Approx. 350 g / 12.3 oz. (excluding power cord and protective covers) All the data above is based on Canon’s testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions, maximum diameter, length and weight listed above are based on CIPA Guidelines (except weight for camera body only).
  • Page 86 (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.” * Notice displayed in English as required. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 87 Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non- genuine Canon accessories (e.g., a leakage and/or explosion of a battery...
  • Page 88: Safety Warnings

    • Do not fire the flash at someone driving a car. It may cause an accident. • Do not fire the flash near a person’s eyes. It may impair the person’s vision. When using flash to photograph an infant, keep at least 1 meter/3.3 feet away. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 89 • Occasionally unplug the power plug and use a dry cloth to clean off the dust around the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet may become moist and short-circuit the outlet to cause a fire. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 90 • Do not use paint thinner, benzene, or other organic solvents to clean the equipment. Doing so may cause fire or a health hazard. If the product does not work properly or requires repair, contact your dealer or your nearest Canon Service Center. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 91 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 92 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 93: Software Start Guide

    XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX XXXXX Windows XXX XXX Windows XXX XXX Mac OS X XXX XXX Mac OS X XXX XXX EOS Solution Disk EOS Camera Instruction (Software) Manuals Disk Downloaded From camera-usermanual.com Canon Manuals...
  • Page 94: Software Start Guide

    You can edit Picture Style to your unique image characteristics and create/save an original Picture Style file. Downloading from Canon website The following software can be downloaded from Canon website. EOS MOVIE Utility for EOS-1D C [On Windows] You can play back movies you shot, consecutively play back separate movie files, and save them as a single movie file with this software.
  • Page 95 Select your geographic area, country and language. Click [Easy Installation] to start installation. Follow the on-screen instructions to complete the installation procedure. If prompted, install Microsoft Silverlight. Click [Finish] when the installation has completed Remove the CD. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 96 Check that the camera is not connected to your computer. Insert the EOS Solution Disk (CD). On your computer’s desktop, double-click and open the CD-ROM icon, and then double-click [Canon EOS Digital Installer]. Select your geographic area, country and language. Click [Easy Installation] to start installation.
  • Page 97 Adobe Reader (latest version recommended) must be installed to view the Instruction Manual files (PDF format). Install Adobe Reader if it is not already installed on your Macintosh. To save the PDF manual to your computer, use the ‘Save’ function of your Adobe Reader. Downloaded From camera-usermanual.com Canon Manuals...
  • Page 98: Index

    Movie..........15 Electronic level........26 AE lock........22 AF mode ......33, 51 File size...........37 Aperture-priority AE ....20 Final image simulation ....30 Autoexposure shooting ....18 Frame rate ........36 Compression method....36 Free run ..........47 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 99 USB (Digital) terminal..... 13 Playback .........57 V.Assist........... 45 Video system......34, 69 Q ...........33 View Assist ........45 Quick Control ........33 Volume (Movie playback) ....59 Rec command.........49 Wind filter ........39 Rec run ...........47 Downloaded From camera-usermanual.com Canon Manuals...
  • Page 100 CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The lenses and accessories mentioned in this Instruction Manual are current as of August 2013.

Table of Contents