Making A Call From The Caller Id List - Uniden DXAI4588-2 Owner's Manual

2) Enter the number ( [0] – [9] ), or press [vol/ / ] or [vol/ / ] to select the speed dial number you would like to
dial.
3) Press [talk/flash]. CONNECTING changes to TALK, and the volume setting and the
number selected appear on the display. Then the displayed number is dialed.
Note: You can also press [talk/flash] before you access the speed dial memory.
When you come to the phone number you want to dial, press [select/channel].
To.cancel.speed.dialing
Press [end] to return to standby, or press [memory] to return to the call. (During a call, don't press [end], or the call
will be disconnected.) Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the speed dialing will be
cancelled.
Making.a.Call.from.the.Caller.ID.List
You can place a call directly from the Caller ID list.
) Press [cid/menu] in standby. Use [vol/ / ] or [vol/ / ] to select the phone number that
you want to dial.
2) To have the phone dial a "" before the displayed Caller ID number, press [1]. To have the
phone dial the stored area code before the displayed Caller ID number, press [3].
3) Press [talk/flash]. The displayed phone number dials automatically.
Note:.
• You can also press [talk/flash] before you access the Caller ID list. When you come to the phone
number you want to dial, press [select/channel].
•..You.cannot.make.a.call.from.the.Caller.ID.list.if.your.cordless.telephone.is.connected.to.a.private.
branch.exchange.(PBX).
24