FujiFilm instax SQUARE SQ6 Users Manual, Trouble Shooting, Safety Precautions page 23

Instant camera

Hide thumbs Also See for instax SQUARE SQ6:

®Remove soil and dust from the lens, viewfinder window, etc. with an air blower and by wiping lightly with a piece of

soft cloth.

® Do not use solvent such as thinner and alcohol to remove soil.

(])Keep the film chamber and camera interior clean to avoid damaging films.

In hot weather, do not leave your camera in a closed car or on the beach, and do not leave it in moist places.

I'!!!IW

®Moth repellent gas such as naphthalene adversely affects your camera and films. Avoid keeping your camera or films in

a chest with mothballs.

@Your camera is computer-controlled. If you should experience an operational issue, remove the batteries and then

reload them.

GJ) Note that the temperature range within which your camera can be used is +5°(/+41 oF to +40°(/+ 1 04°F.

INSTAX SQUARE FILM AND PRINT CARE

Keep the film in a cool and dry place. Do not leave the film in a place where the temperature is extremely high (e.g., in a

closed car).

When you load a film pack, use the film as soon as possible.

If the film has been kept in a place where the temperature is extremely high or low, bring it to room temperature

before starting to take pictures.

@Be sure to use the film before the expiration or"Use Before" date.

®Avoid airport checked luggage inspection and other strong X-ray illumination. The effect of fogging, etc. may appear

on unused film. We recommend that you carry the camera and/or the film onto the aircraft as carry-on luggage. (Check

with each airport for more information.)

®Avoiding strong light, keep the developed prints in a cool and dry place.

(]) Do not puncture, tear, or cut FUJI FILM Instant Film "instax SQUARE': If film becomes damaged, do not use.

:~~:A

· - -

-Yh.

,~w

~·

.--..-.-

"~'

·~

~-~

·~

Table of Contents