Kenwood KRC-603C Instruction Manual page 19

Other features (See page 8)
Table of Audio Control Setting
ee Operation of Audio control button
mode
Bass ;
5 BAS )
ee Treble decreased. Treble tncreased.
Audio Control Setting
Adjust various parameters of sound quality.
1 Press the AUD button to enter the control mode
Each time the AUD button ts pressed, the adjustment mode
display changes as follows:
ES Bass » Treble » Balance ® Fader a |
Volume <@N-F Levelt (only when being switched KRC 503 only)
If you do not move to step 2 in flee Seconds, the unit woe
switch back to the volurne adjustment mode (that 1s the nor-
mal mode).
Balance
Left channel empha- Right channel empha-
Source tone memo CBB! sized, sized.
ry
Each source {tape, FM, AM and disc changer) has its own memo- fader Rear channel Front channe!
ry in which to store the bass and treble tone settings. ("FAD") increased. increased.
The settings made for a particular source are recalled automat- -
cally whenever you use that source (for example, FM mode uses Non-Fading
the tone settings made for FM, AM for AM, etc). Ree Level Au ra hs chan- Non-fading sound
in -
2 Bit the \"/A buttons to adjust the mode shown in the dis- (KRC-503 ee srigheeiecd: emphasized.
play. onl
Use the following table as a guide for adjusting the settings in Y
each mode.
The balance of the non-fading sound cannot be adjusted.
Function of the KRC-603C/503
Selectable Illumination
You can switch the color of the button illumination between
green and amber.
Switching the illumination:
Press the ILLUM button for at least one second to switch
between amber and green.