Table of Contents
Advertisement
Digital E.LS.
/NEG/POS Transposer
Digital Electronic Image
Before you begin...
This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
1 Press the E!S button to activate the
Digital E.1.S. function. ("ElS" will
appear in the EVF.)
+ The image in the EVF will be
enlarged slightly and the shutter
speed will automatically adjust from
1/80 to 1/350 according to the
brightness of the subject.
2 Press the EIS button again to cancel.
¢ You may also use the High Speed
Shutter function (from 1/100 to 1/
10000). The shutter speed you select
remains active even after you cancel
the Digital E.1.S. function.
+ Be sure that the Digita! E.1.S. is
turned off when not in use.
Digital E.!.S. may not function
when...
. Camcorder movement is too ex-
treme.
* recording a subject with distinct
horizontal or vertical stripes.
* recording in low light situations.
* EIS indicator flashes when the light
level is inadequate.
* recording a subject under intense
ftuorescent light.
* recording a scene with very fast
motions.
Before you begin...
This special effect feature allows you to change
+ Set the POWER switch to CAMERA.
the picture from a positive to a negative image.
negative image.
Press again for normal recording.
e Hold down the NEG/POS button for about
3 seconds to activate this feature for the
first time after the power is turned on.
Advertisement
Table of Contents
