Adjusting The Windshield Mounting Clip - Uniden LRD6299SWS Operating Manual

Adjusting the Windshield Mounting Clip

1. The metal portion of the bracket locks into the plastic portion at
three different positions. These positions can be used for vehicles
with different vertical angles of their windshields. The back
position can be used for vehicles with windshields that are slanted
back.
2. For optimum laser detection, bend the angled portion of the
windshield mounting bracket so that the LRD 6299SWS/LRD
6399SWS is parallel to the road surface. Be sure the LRD
6299SWS/LRD 6399SWS is mounted so it is free of obstructions
from seat backs, rear view mirror, sun visors, or the ceiling of the
automobile. There must be a clear 360° line of sight to the outside
of the vehicle.
To mount the LRD 6299SWS/LRD 6399SWS:
1. Insert the windshield clip into the LRD 6299SWS/LRD 6399SWS.
2. Place the bracket and the LRD 6299SWS/LRD 6399SWS in the
proper location on the windshield of your vehicle, and press the
suction cups firmly against the windshield.
9