To Receive - Uniden Grant LT User Manual

T T o o R R e e c c e e i i v v e e
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
1. Turn unit ON and set
VOLUME Control to a
comfortable level.
2. Select CHANNEL.
3. Set switch to NB/ANL .
Dynamic Squelch Control automatically sets Squelch to the optimal level for stronger
transmission and signal clarity. To scan for weaker signals, turn Dynamic Squelch
Control off and perform the following steps:
4a. Turn SQUELCH fully clockwise so only strong
signals can get through.
4b. Turn SQUELCH fully counter-clockwise until you
hear a hiss. Everything gets through - noise, weak
signals, and strong signals.
4c. Turn SQUELCH back clockwise until the hiss stops.
Only clearer signals get through.
Set SQUELCH only when the
radio is not receiving a
strong signal.
6