UMAX Technologies PowerLook 1000 Operation Manual page 6

Step 2. Connect the Cable
For PC Users:
Connecting the USB Cable (Most systems)
1. Locate the USB cable that is provided. Plug the wide end of the cable firmly into one of
the available USB ports on your computer.
2. Plug the small end of the cable into the port marked "USB" located on the back panel of
the scanner as shown in picture C.
Connecting the IEEE 1394 Cable (If your PC is equipped with a IEEE 1394 interface)
1. Connect one end of the IEEE 1394 cable into the port located on the back panel of the
scanner.
2. Connect the other end of the IEEE 1394 cable to one IEEE 1394 port of your computer.
6