Table of Contents
Advertisement
Ea
Repair Flow Chart (Continued)
I44 Go to cover page
17. VbIk
VbIk pin is floating while pll1(pin26) is
unlock in searching mode
30. IC sel = hi
x
the initial sequence of tIC IC
31 IIC sda =hi
7501 ,7331,
compensate for the V_size
1
;
4
Birr
S.EHT compen
owing the load variation
19,20,22
Voscf,Vage, Vcap
Pin20 determin the AGC
Pin19,pin22 determin frequency
50Hz< frag. <160Hz
SS
ee
ear
Pin9 determin the
pllt foop filter
pin 8,6,4 H-Freq
working range
9,8,6,4
PLL1,RO,CO, Hoscf
30K<freq.<71KHz
1.compare pin 12 and control the phase of HDRV
seats
2.softstart 14, 15, 16,
17 EHT_compen.
compensate for the H_size owing the load variation
32. Focus
~~»
to 7616 for the V dynamic focus
LightFrame
for Windows
Introduction
Philips LightFrame feature enriches the experience of pictures and
video on a Philips CRT (picture tube) monitor. This highlighting is done
by boasting the brightness and sharpness on a selected region of the
monitor screen. Since high brightness and sharpness are not preferred
for most standard Windows applications, this special feature will only be
active in certain circumstances. So that you can control these
circumstances, a special program and icons will be installed in your
Windows operating systems.
Notes
Philips LightFrame will only work with monitors that have been built to
use this software. Earlier Philips monitors or other manufacturers
monitors will not work with this special software. It is recommended that
you install this software only on a Philips monitor designed to use it.
These monitors can be identified by the LightFrame logo
'on the front of the monitor.
LightFrame"3
This software is not designed for use with LCD flat screen monitors.
LightFrame will work with true Windows-based programs and DOS-
based programs that operate in a Windows environment. It will not work
with DOS-based programs operating only in a DOS environment.
Definitions
The following list contains definitions for trequentty used words.
Highlighted window:The selected window on which LightFrame
is active.
Highlighted area:
The selected rectangle (area) on which
LightFrame is active.
Compatibility
This version of LightFrame is compatible with
Windows 95
Windows 98
Windows ME Millennium Edition
Windows NT
Windows 2000 Professional Edition
Windows XP
Language Selection
While English is the default language of LightFrame, the User Interface
can be set up to operate in Dutch, French, German, italian, Portuguese,
or Spanish.
installation
1) To install LightFrame, place the CD in the CD-ROM drive.
2) Next, when the manu of items on the CD appears on your screen,
click on 'Install LightFrame'.
3) Now, follow the on-screen prompts to properly instal! the program.
The software checks to see if you have a compatibie monitor. You
must say yes to the license agreement for the software to install.
4) After installation, LightFrame automatically loads and the icon
appears in the taskbar.
Notes
LightFrame is installed in the Start menu, under Programs. Uniess
otherwise selected during installation, LightFrame is installed in
<C:\Prograr Files\Philips\LightFrame. A shortcut is installed in the
StartUp folder and on the desktop. (If needad, LightFrame can be
operated manually from the StartUp folder.)
if LightFrame detects that your monitor is not LightFrame compatible,
an message appears on the monitor screen. See Error Message
number 1 under the heading Error Messages. If you see this message,
you can select to abort or continue the installation. However, if you
continue (he installation, LigntFrame will probably not work on
the monitor.
Ports ei)
kd Go to cover page
1. Put CD-ROM into CD-ROM Drive,
bring
up Fig 1
Eyer rarer
re emeny
2. Click one of languages (for example : English)
at ma
nerenena reat
3. Click LightFrame,
bring up, click Continue icon as Fig.3
4. Click Next,
bring up, Light Frame setup file as Fig.4
Fig 1
on the screen,bring up, click Light Frame icon as Fig 2
Fig3
Fig 4
cay
eg ag
eet
tn Sa
a
age
Advertisement
Table of Contents
